Motorcycle disc brakes fail, these are the causes and how to fix them!

Motorcycle disc brakes fail, these are the causes and how to fix them!

Brake disc brakes fail, of course, there are many causes, so it’s mandatory for you to know how to fix them.

Especially when passing through a downhill road, sometimes the brakes fail and this is very dangerous.

However, it turns out that the driver can actually be one of the factors for the failure of the brakes when crossing the derivative road. This is because the way of braking when on a down and flat road is different.

Motorcycle Disc Brake Solution Blong

Incidents of road accidents can not only occur due to being hit by other drivers but also due to faulty brakes.

Now to be able to minimize the occurrence of accidents, it is very important for us to take care of the vehicle, such as disc brakes.

Meanwhile, the workings of disc brakes themselves are better than drum brakes. Not only that, but the age for the replacement of component parts is also longer.

However, this type of disc brake also has a weakness that can cause the brakes to fail.

Then there are various things that can cause the disc brake function to not work optimally. Immediately, here are some causes and tips to fix it easily.

Causes of Brakes to Blong

The cause of the motorcycle disc brakes failing is because the canvas is getting thinner so it can cause performance to be not optimal.

If we leave it alone, it can interfere with the braking function, resulting in brake failure.

Although it can provide maximum braking power, it turns out that the operation of disc brakes definitely has its rules. Especially when passing through a downhill road, the motorcyclist will use the brakes.

However, pressing the disc brake continuously can cause the brakes to fail.

This is because it can make the brake fluid hot, which will cause the seal in the calipers to expand.

How to handle it?

The way to deal with a failed motorcycle disc brake is quite easy. However, not everyone can do it alone. One way is to regulate the use of the brake itself.

So, even if the brakes feel like a bong, you can still control the use of the brakes.

Although this method can only happen for a moment, the brakes will be able to return to work a few moments later.

In addition, you should not turn off the engine when the brakes fail, because this will make it difficult for you to control the speed. So, run the motor but at a reduced speed and adjust it.

When the brakes fail, you should avoid crowds so that bad things like accidents don’t happen. Therefore, you can find a place that is quiet from other motorists.

After knowing about the causes and how to deal with a failed motorcycle disc brake, it is now important for you to take care of it. Because by taking care of the vehicle, it can be maximized and not easily damaged.

Leave a Reply

Your email address will not be published.